Description
The ultrasonic flow meters of the PCE-TDS 200+ series play an important part in the context of the energy transition.
As part of the energy transition, many countries are striving to switch from fossil fuels to renewable energies in order to reduce CO2 emissions and ensure a sustainable energy supply. In this context, energy generation plants such as solar power plants, wind farms and new heat pumps are gaining importance.
The PCE-TDS 200+ series enables accurate measurement of the flow of liquids, which is a crucial advance in various steps of energy production. For example, the device can be used to monitor the flow of cooling water in solar thermal systems or to measure the flow in heating systems.
By precisely measuring flow, the PCE-TDS 200+ series supports efficient control and optimisation of power generation processes. Accurate recording of the flow enables operators to maximise the energy yield and optimise energy consumption at the same time. This helps to increase the efficiency and thus the economic viability of renewable energy plants.
To install the sensors of the heat flow meter, an installation aid is available that graphically displays the signal quality. In addition, it shows whether the sensors of the flow meter are placed at the correct distance from each other. After entering the pipe and medium specifications, the flow rate, the volume flow and the volume are displayed.
Real-time measurements allow deviations or faults to be detected quickly, enabling timely response and maintenance to minimise downtime. A data logger can also be set up to save the measurement results on a 32 GB SD card for later evaluation.
Overall, a PCE-TDS 200+ series flow meter helps to improve the efficiency, sustainability and cost-effectiveness of energy generation in the context of the energy transition. Precise measurements of the flow rate enable optimised use of renewable energies and thus make an important contribution to achieving climate targets and a sustainable energy future.
PCE Instruments UK Ltd
Phone: +44 (0) 161 464902 0
Trafford House, Chester Rd.
info@pce-instruments.com
Manchester M32 0RS
www.pce-instruments.com
Specifications of the PCE-TDS 200+ series:
Flow
Measurement range ± 32 m/s
Resolution 0.001 m/s
Accuracy DN ≥ 50 mm ± 1.5 % of rdg.
(Velocity > 0.3 m/s)
Accuracy DN < 50 mm ± 3.5 % of rdg.
(Velocity > 0.3 m/s)
Repeatability ±0.5 % of rdg.
Temperature resistance -30 … +160 ºC
Measuring method N / V / W / Z
Pipe sizes DN 15 … DN 6000
More information can be found here: https://www.pce-instruments.com/english/measuring-instruments/test-meters/ultrasonic-flow-meter-kat_152137.htm
More information can be found here: https://www.pce-instruments.com/english/measuring-instruments/test-meters/ultrasonic-flow-meter-kat_152137.htm
